All Radiometrix Products

12.5kHz channel NBFM VHF Transceiver

The ENX1 transceiver module offers a 100mW RF output VHF data link in a DIL pin-out and footprint. This makes the ENX1 ideally suited to those low power applications..

Data Sheet | View Specs


Narrow Band Direct Interface Multi Channel Transceiver

The RMX2 is an ETSI EN 300 220-3 compliant UHF FM narrow band semi-duplex radio data module. It is a high performance ransceiver designed for use in industrial...

Data Sheet | View Specs


NBFM Multi-channel receiver for 868MHz SRD band

NBFM Multi-channel receiver for 868MHz SRD band, MSR3

Data Sheet | View Specs


NBFM Multichannel Data Packet Link Receiver

The PL modules use the hardware of the existing LMT/LMR transmitter receiver pair, combined with completely new firmware to produce a simple to use but readily controllable data link.

Data Sheet | View Specs


433.92MHz Low Cost FM Receiver

The WRX2 is a low cost wide band FM receiver in a Radiometrix SIL standard pin out and footprint. It offers an economical and reliable low power data link without compromising the receiver performance.

Data Sheet | View Specs


433 / 868MHz FM Data Transceiver, BiM3G

The BIM2/3G data radio module is a PLL synthesiser based miniature PCB mounting UHF radio transceiver which enable the simple implementation of a wireless data link at up to 128 kbps at distances up to 75 metres in-building and 300 metres open ground.

Data Sheet | View Specs


SFX2 500mW NBFM

The SFX2 transceiver module offers a 500mW RF power output in the UK 458MHz band. This makes the SFX2 ideally suited to those low power applications where existing multi-channel narrow band devices like TR2M have insufficient range.

Data Sheet | View Specs


Long Range Remote Control Transmitter

The 10kHz channel NBFM NTX0 transmitter and NRX0 receiver operate on the licence exempt 27MHz SRD HF allocation. These modules offer a low power, reliable data link in a Radiometrix SIL standard pin out and foot print.

Data Sheet | View Specs


500mW Multichannel VHF transceiver

SHX1 is small multi-channel 25kHz narrow band VHF transceiver with up to 500mW RF power output. It is usable for 144MHz band amateur, 151MHz US MURS and European 169MHz band high power applications.

Data Sheet | View Specs


VHF Narrow Band FM Low Current Receiver

The RX1L receiver module has very low current consumption (1mA) and it offers a reliable data link in an industry-standard pin out and footprint.

Data Sheet | View Specs


NiM1B-154.570-5-25-MURS

The new Mini - MURS (Multi-Use Radio Service) NiM1B-154.570-5-25-MURS is frequency programmable narrow band transceiver that offers a low power, reliable data link in a Lemos/Radiometrix transceiver standard pin out and footprint. Suitable for licensed and unlicensed VHF allocations, FCC part 90 and part 95.

Data Sheet | View Specs


NBFM Multichannel Data Packet Link Transmitter

The PL modules use the hardware of the existing LMT/LMR transmitter receiver pair, combined with completely new firmware to produce a simple to use but readily controllable data link.

Data Sheet | View Specs


NBFM Multi-channel 500mW UHF Transmitter

The TLM2 transmitter module offers a 500mW RF output in the UK 458MHz. This unit is ideally suited to applications where existing lower powered transmitters provide insufficient range.

Data Sheet | View Specs


UHF Narrow Band FM Transmitter

Available for licence-exempt operation in the 433MHz (EU) and 458MHz (UK) bands, the NTX2B module combine effective screening with internal filtering to minimise spurious radiation and susceptibility thereby ensuring EMC compliance.

Data Sheet | View Specs


UHF Narrow Band FM Transmitter

The NTX2B transmitter and NRX2B receiver offer a low power, reliable data link in a Radiometrix SIL standard pin out and foot print.

Data Sheet | View Specs


NBEK Controller As 1200 Baud Modem

The Narrow band Evaluation Kit (NBEK) IC can be used as 1200baud half-duplex serial modem suitable for narrow band receivers, transmitters and transceivers (or any RF modules with >5kbps data rate)

Data Sheet | View Specs


UHF FM Code-Hopping Data Transmitter

The KTX2 is a miniature PCB mounting code-hopping UHF radio transmitter suitable for use in secure remote keyless control applications at distances up to 75 metres in-building or 300 metres open ground.

Data Sheet | View Specs


UHF FM Data Transmitter Module

The TX2S module is a miniature PCB mounting UHF radio transmitter which enable the simple implementation of a data link at up to 40 kbps at distances up to 75 meters in-building and 300 meters open ground.

Data Sheet | View Specs


Narrow Band Evaluation Kit

Narrow Band Evaluation Kit (NBEK) can be used to evaluate all Narrow Band Multi-channel and Single frequency DIL version modules. Radio modules can be assessed for their suitability in terms ..

Data Sheet | View Specs


KFX2

The KFX2 is a UHF code hopping 5 button keyfob transmitter for use with the matching KDEC decoder or KRX-416-000-DIL decoder IC to provide a remote controlled link in excess of 100 metres over..

Data Sheet | View Specs


SPM2/RPM Evaluation Kit

The SpacePort Modem Evaluation board enables SPM / RPM to be transformed in to a complete Radio modem with DCE type RS232 interface. Supports Point to Multi Point and Broadcast Mode Test.

Data Sheet | View Specs


Narrow Band Module Evaluation Kit

Narrow Band Evaluation Kit (NBEK) can be used to evaluate all Narrow Band Multi-channel and Single frequency DIL version modules. Radio modules can be assessed for their suitability in terms ..

Data Sheet | View Specs


UHF Narrow Band FM Transceiver

The NTR2 transceiver offers a low power, reliable data link in a Radiometrix SIL standard pin out and footprint. This makes the NTR2 ideally suited to those low power applications where existing ..

Data Sheet | View Specs


UHF FM Data Receiver Module

The RX2G data radio module is a PLL synthesiser based miniature PCB mounting UHF radio transmitter and receiver pair which enable the simple implementation of a wireless data link at ..

Data Sheet | View Specs


CTA88 remote control chip demo boards

The CTA88 chip is a simple encoder/decoder for use with ISM band telemetry modules. It permits a simple, one way wireless link to be established, for simple remote control applications..

Data Sheet | View Specs


12.5kHz Channel VHF receiver

The ENR1 is a miniature PCB mounting VHF radio data receiver. It is a narrowband 12.5KHz spacing receiver incorporating a received signal strength indicator (RSSI)...

Data Sheet | View Specs


Code hopping receiver with up to 5 relay outputs

KDEC is designed to provide the user with a complete receiver interface for Radiometrix transmitters such as KTX2 and KFX2. No additional parts needed to implement a complete ..

Data Sheet | View Specs


2 Watt Multi-channel VHF Transceiver

The QPX1 transceiver module offers a 2 watt RF output VHF radio link, in a robust aluminium extruded casing. This unit is ideally suited to applications where existing lower powered transceivers..

Data Sheet | View Specs


VHF Narrow Band FM Multi channel radio Receiver

The TX1M transmitter receiver module offers a low power, reliable VHF data link in an industry-standard pin out and footprint. This makes the RX1M pair ideally suited to those low power ..

Data Sheet | View Specs


VHF Narrow Band FM Multi channel radio Transmitter

The TX1M transmitter modules offers a low power, reliable data link in an industry-standard pin out and footprint. This makes the TX1M pair ideally suited to those low power applications where..

Data Sheet | View Specs


433MHz Wide Band FM radio transceiver

BiM2A is half-duplex crystals controlled PLL wideband FM transceiver operating on 433.05-434.79MHz European SRD band.

Data Sheet | View Specs


RPC2A-433-64 transceiver module

The RPC2A-433-64 is intelligent transceiver modules, which enable a radio network/link to be simply implemented between a number of digital devices. The module combines a UHF radio transceiver..

Data Sheet | View Specs


UHF FM receiver module with RSSI

The RX3G is a PLL synthesiser based miniature PCB mounting UHF radio data receiver. With the matching TX3B-869-64 transmitters, RX3G allows the simple implementation of wireless data links at..

Data Sheet | View Specs


TDL2A Evaluation Kit

TDL2A Evaluation Kit enables user to evaluate transparent data link capability of TDL2A OEM modems. The eval kit is also useful for range testing and it enables evaluation of TDL2A ..

Data Sheet | View Specs


8 bit Address - 8 bit Data encoder/decoder

CTA88 is an 8 bit address, 8 bit data encoder and decoder combined in a single IC. This device is intended to be used with ISM band telemetry modules and can be operated in either ...

Data Sheet | View Specs


Code-hopping decoder with 4 outputs

Key-code Receiver 416 is a single IC solution for decrypting and decoding Radiometrix code-hopping transmitters. The device will retain the identities of up to 16 code-hopping transmitters..

Data Sheet | View Specs


QR96 (9600baud)

The Quasi DC Recovery circuit (QR96) can be used to improve data recovery of receiver if the raw data is transmitted without any bit balancing. The QR96 measures the minimum..

Data Sheet | View Specs


UHF FM Wide Band 450mW Transmitter

The TX3H-869.5-15 from Radiometrix, is an FM transmitter module achieving a power output of 450mW at 869.5MHz. It is fully pin-compatible with the company's established range of SIL TX modules..

Data Sheet | View Specs


SHX1T

SHX1 is small multi-channel 25kHz narrow band VHF transceiver with up to 500mW RF power output. It is usable for 144MHz band amateur, 151MHz US MURS and European 169MHz band high power applications.

Data Sheet | View Specs


QPX1

The QPX1 transceiver module offers a 2 watt RF output VHF radio link, in a robust aluminium extruded casing. This unit is ideally suited to applications where existing lower..

Data Sheet | View Specs


QPT1

The QPT transmitter module offers a 2 watt RF output VHF radio link, in either a robust aluminium extruded casing, or a smaller footprint PCB mounted shield can. This unit is ideally suited to ..

Data Sheet | View Specs


LMR1

The LMT1 transmitter and LMR1 receiver modules offer a multi channel, low power, and reliable VHF data link. This makes the LMT1/LMR1 pair ideally suited to those low power applications ..

Data Sheet | View Specs


LMT1, LMT1-154-5-12k5-MURS

The LMT1 transmitter and LMR1 receiver modules offer a multi channel, low power, and reliable VHF data link. This makes the LMT1/LMR1 pair ideally suited to those low power applications ..

Data Sheet | View Specs


SHX1

SHX1 is small multi-channel 25kHz narrow band VHF transceiver with up to 500mW RF power output. It is usable for 144MHz band amateur, 151MHz US MURS and European 169MHz band high power applications.

Data Sheet | View Specs


400mW Multichannel 869MHz band Modem, FPL3

The FPL3 is a 9600baud half-duplex multi channel OEM radio modem with a power output of 400mW. FPL3 operates in the Europe-wide 869.40 - 869.65MHz sub-band. It is also available in the Indian licence free 865 - 867MHz band (General telemetry and RFID).

Data Sheet | View Specs


High power Multichannel 869MHz band transceiver

FPX3 is a small, high power (half-watt) multi-channel wide band FM transceiver, operating in the Europe-wide 869.40 - 869.65MHz sub-band. It is also available in the Indian licence free 865-867MHz band (General telemetry and RFID).

Data Sheet | View Specs


CTA88 chip based 2 channel application boards

The CTA88 chip is a simple encoder/decoder for use with ISM band telemetry modules. It permits a simple, one way wireless link to be established, for simple remote control applications, with a minimum of effort and no customer software input. These tx and rx application boards are designed to allow easy evaluation of the CTA88 device in elementary jobs. They provide simple 2 channel implementations, using either LMT/LMR or BiM footprint radio modules.

Data Sheet | View Specs


UHF FM Code-Hopping Receiver Module -KRX2

KRX2 is a small PCB mounting UHF integrated receiver-decoder module that is ready-to-use with our UHF FM code-hopping transmitters for secure wireless remote control and keyless security systems.

Data Sheet | View Specs


Multi channel FM 868MHz band Class 1 Social Alarm Receiver

The SAR3 is a miniature PCB mounting UHF radio data receiver. It is a narrowband 25KHz spacing receiver incorporating a received signal strength indicator (RSSI) and 4 channel capability. It allows the simple implementation of data links at speeds up to 8kbps.

Data Sheet | View Specs


Bi-directional RF Remote Control application boards

These simple application boards use firmware based on the familiar CTA88 remote control systems to implement a bi-directional control link. A system consists of a master board (which initiates communication burst cycles) and a slave (which responds to them). In hardware terms these boards are the same, but have different firmware loaded.

Data Sheet | View Specs


M48A Application Board

The apps board presents the M48 modem, combined with a radio module (either USX or BiM/NiM family) and suitable interface circuits, power supplies and connectors. Optionaly, the board can be housed in an EAS80 extruded aluminium housing. In the simplest case, a pair of these units (with suitable aerials and power supplies connected, of course) can be connected directly to the serial ports of a pair of industrial PCs and the resulting wireless data link used without any further installation or programming.

Data Sheet | View Specs


NBFM Multi-channel receiver for 868MHz SRD band

The COR3 is a 25kHz channel narrowband receiver intended for European 868MHz band Non-Specific SRD applications. The module offers a low power, reliable data link in an industry-standard pin out and footprint.http://www.radiometrix.com/files/additional/cor3_0.pdf

Data Sheet | View Specs


HX1-144.390-10

The special HX1 transmitter modules offer a 300mW RF output VHF data link in Radiometrix SIL standard pin-out and footprint. This makes the HX1 ideally suited to those low power applications where existing narrow band and wideband transmitters provide insufficient range. Together with the matching RX1 or BiM1R receiver a one-way radio data link can be achieved over a distance up to 10km+ with suitable choice of data rate and antennas.

Data Sheet | View Specs


WFX2-458-5 500mW High Power

The WFX2 is a high power, fast-switching, multi-channel narrowband FM transceiver, offering 500mW RF power output on the UK 458MHz license-free Industria

Data Sheet | View Specs


BiM2G / BiM3G 433 / 868MHz FM

The BIM2/3G data radio module is a PLL synthesizer based miniature PCB mounting UHF radio transceiver which enable the simple implementation of a wireless data link at up to 128 kbps at distances up to 75 meters in-building and 300 meters open ground.

Data Sheet | View Specs


CLX219200 baud Modem

The CLX2 is a 19,200baud half-duplex serial radio modem module operating on licence-exempt European 433.05-434.79MHz SRD band. CLX2 is an intermediate level OEM radio modem which is in between a raw FSK radio module like BiM2G and a sophisticated OEM radio modem like RPM2A. It takes care of preamble, frame synchronisation and error checking.

Data Sheet | View Specs


SAT3 869MHz Narrow Band FM

The SAT3 transmitter modules offer a 10mW RF output UHF data link in Radiometrix SIL standard pin-out and footprint. This makes the SAT3 ideally suited to low power applications using narrow band transmitters.

Data Sheet | View Specs


Long Range Remote Control Receiver

The 10kHz channel NRX0 receiver operate on the licence exempt 27MHz SRD HF allocation. These modules offer a low power, reliable data link in a Radiometrix SIL standard pin out and foot print.

Data Sheet | View Specs


Bi-directional Low Power RF Remote Control Application Boards

These simple application boards use firmware based on the BD118 remote control systems to implement a bi-directional control link. A system consists of a master board (which initiates communication burst cycles) and a slave (which responds to them). In hardware terms these boards are the same, but have different firmware loaded.

Data Sheet | View Specs


SHX1-144-5 500mW VHF NBFM multi channel radio modem

The M48-144-SHX1 presents M48 modem IC combined with a SHX1 radio module and suitable interface circuits, power supplies, connectors to provide a complete RS232 radio modem interface.

Data Sheet | View Specs


UHF Narrow Band FM sub-miniature transmitter

The MTX2 transmitter module adds a totally new sub-miniature form factor to the existing range of Radiometrix ISM band devices. Using cutting edge integrated RF devices, it offers multi channel, low power narrowband operation in a previously unobtainable size.

Data Sheet | View Specs


868MHz band NBFM sub-miniature TX

The MTX3 transmitter module adds a totally new sub-miniature form factor to the existing range of Radiometrix ISM band devices. Using cutting edge integrated RF devices, it offers multi channel, low power narrowband operation in a previously unobtainable size.

Data Sheet | View Specs


A40 Wireless RF Module

A40 Wireless Portable Alarm Up to a 40 node alarm system - offering alarm outputs at each location for sounder and or strobe light. An optional display indicates location of alarm activation. With the display board you are also able to detect a battery low on any unit in the system as well as battery low indication on each node via an LED indicator or sound indicator via an optional low battery sounder board. The whole system can be battery operated for 6 months on an Alkaline "C" cell pack.

Data Sheet | View Specs


UHF Narrow Band FM Multi channel Transceiver

The TR2M transceiver module offers a low power, reliable data link in an industry-standard pin out and footprint.

Data Sheet | View Specs


UHF Radio Packet Modem

The UHF Radio Packet Modem (RPM2A) is a low cost intelligent radio packet modem that enables a two way radio network/link to be simply implemented between a number of digital devices..

Data Sheet | View Specs


433MHz FM Transmitter

The TX2 data link module is a miniature PCB mounting UHF radio transmitter and receiver pair which enable the simple implementation of a data link at up to 160 kbit/s at distances up to 75 metres..

Data Sheet | View Specs


433MHz FM Receiver

The RX2 data link module is a miniature PCB mounting UHF radio transmitter and receiver pair which enable the simple implementation of a data link at upto 160 kbit/s at distances...

Data Sheet | View Specs


UHF FM Data Transmitter

The TX3A & RX3A are miniature UHF radio transmitter & receiver modules designed for PCB mounting. They facilitate the simple implementation of data links at speeds up to 64kbps and distances.. Available for operation in the 868-870MHz band in Europe and the 902-928MHz band in North America, both modules combine full screening with internal filtering to ensure EMC compliance by minimising spurious radiation and susceptibility.

Data Sheet | View Specs


100mW VHF Transceiver

The BiM1 transceiver modules offer a 100mW RF output VHF data link in Radiometrix transceiver standard pin-out and footprint.

Data Sheet | View Specs


UHF FM Transceiver

FM UHF Transceivers

Data Sheet | View Specs


UHF Radio Packet Controller

Radio Packet Controllers

Data Sheet | View Specs


UHF FM Transmitter and Receiver

TXM-433 - First generation FM Transmitters and Receivers

Data Sheet | View Specs


433MHz FM Transmitter

The TX2A is a data link modules are a miniature PCB mounting UHF radio transmitter and receiver pair which enable the simple implementation of a data link at up to 64 kbps at distances up to 75 meters..

Data Sheet | View Specs


433MHz FM Receiver

The RX2A data link module is a miniature PCB mounting UHF radio transmitter and receiver pair which enable the simple implementation of a data link at up to 64 kbps at distances up to 75 meters..

Data Sheet | View Specs


UHF FM Data Receiver with RSSI

The RX3A is a miniature UHF radio transmitter & receiver modules designed for PCB mounting. They facilitate the simple implementation of data links at speeds up to 64kbps and distances up to.. Available for operation in the 868-870MHz band in Europe and the 902-928MHz band in North America, both modules combine full screening with internal filtering to ensure EMC compliance by minimising spurious radiation and susceptibility.

Data Sheet | View Specs


UHF Radio Packet Controller

Radio Packet Controllers

Data Sheet | View Specs


SpacePort Modem Eval Kit

SpacePort Modem Evaluation Kit (Modules Not Included)

Data Sheet | View Specs


UHF FM Transmitter and Receiver

First generation FM Receivers

Data Sheet | View Specs


UHF FM 400mW Transceiver

The BIM3H UHF radio data transceiver allows the simple implementation of data links at speeds up to 10kbps and distances up 5000 metres over open ground.

Data Sheet | View Specs


UHF FM Transmitter and Receiver

First generation FM Receivers

Data Sheet | View Specs


VHF Radio Packet Modem

The VHF Radio Packet Modem (RPM1) is a low cost intelligent radio packet modem that enables a two way radio network/link to be simply implemented between a number of digital devices.

Data Sheet | View Specs


RX3A-914-10

UHF RF receiver module designed for PCB mounting.

Data Sheet | View Specs


UHF FM Wide Band 450mW Transmitter

The TX3H-869.5-10 is an 869.5MHz FM transmitter module with a power output of 450mW nominal. It is a 100% pin-compatible drop-in replacement for the Radiometrix TX1H-151.300-10..

Data Sheet | View Specs


RPC Development Kit

RPC Development Kit

Data Sheet | View Specs


UHF FM Transmitter and Receiver

RXM-433 - First generation FM Transmitters and Receivers

Data Sheet | View Specs


UHF SpacePort Modem

The SpacePort Modem (SPM) is a low cost highly integrated intelligent radio packet modem that enables a radio network/link to be simply implemented between a number of digital devices.

Data Sheet | View Specs


Radio Packet Modem

The UHF Radio Packet Modem (RPM3) is a low cost intelligent radio packet modem that enables a two way radio network/link to be simply implemented between a number of digital devices...

Data Sheet | View Specs


VHF Narrow Band FM Receiver

The RX1 form a miniature VHF radio transmitter/receiver pair designed for PCB mounting and suitable for extended range data links at speeds up to 10kbps. Link ranges of 10km+ are achievable..

Data Sheet | View Specs


433MHz high speed FM radio transceiver module

The BiM2 transceiver is an enhanced replacement for our original BiM module. It offers greater transmit power, higher data rates, greatly improved receiver interference rejection and..

Data Sheet | View Specs


433MHz High Power Transmitter

The TX2H is a 433.92MHz FM transmitter module with a power output of 25mW nominal. It is a 100% pin-compatible drop-in replacement for the Radiometrix TX2 and can be used to replace the TX2..

Data Sheet | View Specs


869MHz Wide Band FM Transmitter

The TX3B radio transmitter module is an enhanced high power replacement for the European version ..

Data Sheet | View Specs


869/914MHz high speed FM radio transceiver module

The BiM3A radio transceiver module is similar in size and pinout to the BiM2, offering all the advantages of the latter but with reduced power consumption and antenna size...

Data Sheet | View Specs


Universal Evaluation Kit

This Evaluation Kit can be used to evaluate single frequency Radiometrix VHF/UHF transmitter, receiver and transceiver modules. LED indicators are provided to show system status ..

Data Sheet | View Specs


SP2 Evaluation Kit

SpacePort Evaluation Kit can be used to evaluate the Radiometrix SpacePort, Radio Packet Controller modules. LED indicators are provided to show system status and to facilitate range testing...

Data Sheet | View Specs


869MHz Wide Band FM radio transceiver

The BiM3B radio transceiver module is an enhanced high power replacement for the European version BiM3A-869-64..

Data Sheet | View Specs


UHF Narrow Band FM Transmitter

The NTX2 transmitter and matching NRX2 receiver offer a low power, reliable data link in a Radiometrix SIL standard pin out and foot print. This makes the NTX2/NRX2 pair ideally suited..

Data Sheet | View Specs


UHF Narrow Band FM Receiver

The NRX2 receiver and matching NTX2 transmitter offer a low power, reliable data link in a Radiometrix SIL standard pin out and foot print. This makes the NTX2/NRX2 pair ideally ..

Data Sheet | View Specs


Control44 Evaluation Kit

Control44 Evaluation Kit enables user to evaluate Control44 Encoder/Decoder and appropriate single frequency Radiometrix module for a wireless remote control system...

Data Sheet | View Specs


VHF Narrow Band FM Transmitter

The TX1 and RX1 form a miniature VHF radio transmitter/receiver pair designed for PCB mounting and suitable for extended range data links at speeds up to 10kbps. Link ranges of 10km+ are ..

Data Sheet | View Specs


UHF Narrow Band FM Transceiver

The narrow band NiM2 transceiver offers a low power, reliable data link in a Radiometrix transceiver standard pin out and footprint. This makes the NiM2 ideally suited to those low power applications..

Data Sheet | View Specs


VHF Narrow Band FM High Power (100mW) Transmitter

The TX1H transmitter modules offer a 100mW RF output VHF data link in Radiometrix SIL standard pin-out and footprint. This makes the TX1H ideally suited to those low power applications ..

Data Sheet | View Specs


VHF Narrow Band FM Multi channel Transceiver

SMX1 is small multi-channel VHF transceiver operating on 173.200MHz-173.325MHz band. SMX1 offers a fast-route to custom frequency on any VHF band from 130MHz to 180MHz with 25kHz channel spacing.

Data Sheet | View Specs


VHF NB FM High Power Transmitter

VHF Narrow Band FM High Power (300mW) Transmitter

Data Sheet | View Specs


500mW UHF RF power amplifier module

AFS2 amplifier module is intended to increase the transmitted power of a TR2M transceiver module. It provides transmit and receive paths, and can be simply 'dropped into' the aerial...

Data Sheet | View Specs


12.5kHz Channel VHF High Power TX

The ENT1 transmitter modules offer a 100mW RF output VHF data link in Radiometrix SIL standard pin-out and footprint..

Data Sheet | View Specs


SP2-433-160

The SP2-433-160 is a highly integrated intelligent transceiver module, which enable a radio network/link to be simply implemented between a number of digital devices...

Data Sheet | View Specs


VHF Narrow Band FM Multi channel Transceiver

The TR1M narrow band multi channel transceiver module is intended as a general purpose VHF data communication unit. It is available on any frequency between 135 and 175MHz ..

Data Sheet | View Specs


NRX1 FM Receiver

The NRX1 is a VHF radio data receiver and it offers a low power, reliable data link in a Radiometrix SIL standard pin out and foot print. It is an enhanced, low cost version of the Radiometrix RX1..

Data Sheet | View Specs


VHF Narrow Band FM 2 Watt Multi-channel transmitter

The QPT transmitter module offers a 2 watt RF output VHF radio link, in either a robust aluminium extruded casing, or a smaller footprint PCB mounted shield can. This unit is ideally suited ..

Data Sheet | View Specs


Low cost DIL receiver

The CVR1 receiver modules offers a low cost, reliable data link in a Radiometrix BiM standard pin out and footprint. CVR1 is availble in 173.225MHz frequency as standard....

Data Sheet | View Specs


500mW VHF transceiver

VHF Narrow band FM 500mW Transceiver.(500mW)

Data Sheet | View Specs


4 bit data + 4 bit address

Encoder/Decoder for RF remote control.(4 bit data + 4 bit address)

Data Sheet | View Specs


CTR124: 4 bit Address - 12 bit Data Encoder / Decoder

Control124 is a 4 bit address, 12 bit data encoder and decoder combined in a single IC. This device can operate in either Encode or Decode mode. It uses 1kbps differential Manchester bit..

Data Sheet | View Specs


9600 baud RF Modem IC

The i9600 is a 9600baud half-duplex serial modem controller suitable for use with wideband receivers, transmitters and transceivers. It takes care of preamble, synchronisation, bit balancing ..

Data Sheet | View Specs


MY CART
You have: 0 items
Cart Sub-Total: $0.00
Site by Delgar.net