Parani-ESD1000 - OEM Bluetooth-Serial Module-Class1
|
The Parani-ESD1000 is Class1 type Embedded Bluetooth Module for users to make their devices Bluetooth-enable. By default, it supports 100 meters of wireless transmit distance. The Parani-ESD1000 has an extension option so that users can extend the transmit distance up to 1000 meters using optional antennas. It supports Bluetooth v2.0+EDR specification, and external interface UART.
The Parani-ESD1000 is a Class 1 type Embedded Bluetooth serial module designed for users who are wishing to embed Bluetooth connectivity directly onto the circuit boards of RS-232 based equipment like security systems, POS, industrial machinery, and medical devices.
It can be connected to the device via built-in UART interface and communicate with other Bluetooth enabled devices such as mobile phones, handheld computers and laptops.
The Parani-ESD1000 module incorporates Bluetooth 2.0 Protocol Stack with Enhanced Data Rate (EDR) support that offers increased data transfer rates, and lower power consumption. The ESD1000 now support data transfer speeds up to 921.6 kbps. The Parani-ESD1000 supports General access and Serial port profiles. The dimensions of this module are 1.93 x 0.9 x 0.43 (L x W x H in inches).
With no software required, the Parani-ESD1000 is developed for wireless serial communications. Nominal transmit distance is 100 meters and can be extended up to 1 kilometer using the optional patch antenna. The unit can be configured and controlled by using typical AT comments.
The benefits of integrating Bluetooth wireless capabilities include: eliminating cable installation cost, reduce installation and setup, while adding wireless device monitoring and diagnostics. |
Parani-ESD1000
OEM Bluetooth-Serial Module
Class1
1-99 pcs. $46.06 each
100+ $40.18
 |
.: Features :.
- Bluetooth Specification v2.0 + EDR
- Useful for Bluetooth-enabling users’ devices
- Basic Transmit Power : Max. +18dBm, EDR Transmit Power : Max. +6dBm
- Receiving Sensitivity : -88dBm(0.1%BER)
- Supports Bluetooth profiles SPP(Serial Port Profile)
- External interface for UART
- Interoperability with PDA, laptops etc.
- Supports firmware upgrade via windows-based software(ParaniUpdater)
- Working distance ( In an open field ) : Nom. 100 meters, up to 1000m using patch antenna
- Easy to use Windows configuration tool available.
- No external drivers required.
1. Jig Board
2. Pin-Out
.: Specs :.
|
Parani-ESD1000 |
| Serial Interface |
UART
2mm Header 14 x 2, |
Serial UART speed up to 921.6kbps
CTS/RTS flow control, DTR/DSR for loop-back & full transfer |
| Bluetooth Interface |
Bluetooth v2.0 + EDR
Class 1
Profiles - SPP
Working distance (in open field)
Stub1
Stub1
Dipole3
Dipole3
Dipole3
Dipole5
Dipole5
Patch9 |
-
-
-
-
-
-
-
- |
Stub1
Dipole3
Dipole3
Dipole5
Patch9
Dipole5
Patch9
Patch9 |
100 meters
150 meters
200 meters
300 meters
500 meters
400 meters
600 meters
1,000 meters |
[Antennas]
Stub1 : +1dBi Stub Antenna
Diploe3 : +3dBi Dipole Antenna
Dipole5 : +5dBi Dipole Antenna
Patch9 : +9dBi Patch Antenna |
| Max. Tx power |
+18dBm |
| Receive Sensitivity |
-88dBm |
| Antenna gain |
Stub : +1dBi, Dipole : +3dBi, Dipole : +5dBi, Patch : +9dBi |
| Configuration |
ParaniWin, ParaniWizard, ParaniUpdater |
| Modem AT command set |
| Diagnostic LED |
TXD, RXD, RTS, CTS, DTR, DSR, DCD on Jig board |
| Power |
3.3VDC
min : 10mA, max : 60mA |
| Environmental |
Operating temperature: -30'C to 80'C |
| Storage temperature: -40'C to 85'C |
| Humidity: 90% Non-condensing |
| Physical properties |
Dimension(LxWxH)
- 49 x 23 x 11(mm)
- 1.93 x 0.9 x 0.43(in.) |
| Weight: 6g |
| MTBF |
400.89 Years |
| Regulatory Approvals |
FCC Part 15 Subpart C Section 15.247
EN 60950-1: 2001
ETSI EN 300 328
ETSI EN 301 489-1
ETSI EN 301 489-17
MIC (Type Registration)
TELEC (Type Certification) |
| SIG QDID |
B013676 |
| Warranty |
1-year Limited Warranty |
1. Parani-ESD1000 Jig Board
2. Pin-Out
|
|
