UHF Narrow Band
FL Low Cost multi channel radio modules |
 The TLC2 transmitter RLC2 receiver offer
a low power, reliable data link in an industry standard
pin out and foot print. This makes the TLC2/RLC2 pair
ideally suited to those low power applications where
existing wideband modules have insufficient range, or
where low cost multi-channel operation is needed without
compromising on RF specification or regulatory requirement.
Full Specs as PDF
Request a Quote
Features:
• Conforms
to EN 300 220-3 and EN 301 489-3
• High
performance double superhet, PLL synthesizer with TCXO
• SAW front end filter
• Data
rates up to 5 kbps for standard module
• Usable
range over 500m
• Fully screened.
Low profile
• Feature-rich
interface (RSSI, analogue and digital baseband)
• Re-programmable
via RS232 interface
• Low power requirements
Applications:
• Conforms to EN 300 220-3
and EN 301 489-3
• High performance double superhet, PLL synthesizer
with TCXO
• SAW front end filter
• Data rates up to 5 kbps
for standard module
• Usable range over 500m
• Fully screened. Low profile
• Feature-rich interface
(RSSI, analogue and digital baseband)
• Re-programmable
via RS232 interface
• Low power requirements
Technical Summary
• Operating frequency:
433.875-434.650MHz
• Any custom frequency
on 433 - 435MHz
• 32 channels
• Transmit power: 10dBm (10mW)
• Supply range: 4 - 15V (Transmit),
3.7-15V (Receive)
• Current consumption: 32mA (transmit), 18mA
(receive) • Data bit rate: 5kbps max. (standard module)
• Receiver sensitivity -120dBm (for 12dB
SINAD)
• Serial configuration by inverted RS232
at 3V CMOS level
|
| |
