ZigBee Modules - ETRX2USB

ETRX2USB Part No: ETRX2USB Price: $38.5 each Qty: Full Specs PDF

Based on the Ember EM250 SoC, the Telegesis ETRX2USB is a high performance, low power 2.4GHz ISM band transceiver in a USB Stick form factor. It complies with the IEEE 802.15.4 wireless standard, providing a cost effective method of adding wireless sensing to any device which employs USB. For faster production development the device carries the Telegesis AT Style Command line interface which allows the quick integration of meshing radio technology without complex programming or RF design experience. Using a virtual com port the Telegesis AT-Command interface - based on the EmberZNet meshing stack - can be easily accessed by the application software. Custom firmware development is also supported.

Available as standard ETRX2USB or as power amplified ETRX2USB-PA

New - smaller USB stick with LED and access to programming socket

USB Module Features

• LED
• Plug on side allows access to programming connector
• 16 channels in the 2,4GHz ISM Band
• Integrated omni-directional antenna
• Up to 150m range
• USB bus powered
• COM port interface (virtual com port in Windows®
• 0dBm typical output power (-16.6dBm - +3.6dBm range)
• Low power sleep mode of 1.6mW
• Operating Temperature range -40C to +85C

Windows software

As a helpful starting point for developers, Telegesis supplies the simple Telegesis Terminal Application with the node. This terminal program fully supports the USB Module.

OEM format

Unbranded (black, no Telegesis logo) sticks are normally available from stock - please ask for details.

In volume quantities only, the ETRX2USB is also available as an OEM product;

• Without the Telegesis AT command set - use Ember's Development Kit to develop your own firmware application.

• With or without plastic cases.

• Plastic cases are available in a variety of colours and we can have your own logos and artwork printed straight onto the plastic.