RYWB116
Compliant to single-spatial stream IEEE 802.11 b/g/n, Bluetooth 5
$11.50
- Compliant to single-spatial stream IEEE 802.11 b/g/n, Bluetooth 5.
- Co-existence of multiple wireless protocols managed by an internal protocol arbitration manager.
- Ultra-low power consumption with multiple power modes to reduce the system energy consumption.
- Leading edge RF performance providing long range and higher throughputs.
- Transmit power up to +21dBm with integrated PA.
- Wi-Fi receive sensitivity as low as -98.5 dBm.
- BT receive sensitivity as low as -95 dBm.
- Support for Client mode, Access point mode, Wi-Fi Direct and enterprise security.
- Support for concurrent Wi-Fi, Bluetooth 5.
- 8.9 mA transmit current in BT 5 mode, 2 Mbps data rate.
- Operating temperature: -40°C to +85°C.
- Transmission distance up to 200M.
- FCC, NCC Certification.
Description
REYAX’s RYWB116 module provides a comprehensive multi-protocol wireless solution including 802.11 b/g/n, dual-mode Bluetooth 5.
The module is certified by NCC and FCC.
| Item | Min. | Typical | Max. | Unit | Description |
| Operation Voltage | 1.75 | 3.3 | 3.6 | V | VBATT |
| Imax | 400 | mA | Maximum Current consumption in TX mode | ||
| IPmax | 500 | mA | Peak current rating for power supply | ||
| WLAN Data Transfer Average Current | 270 | mA | 11Mbps Tx | ||
| WLAN Data Receive Average Current | 48.2 | mA | 72 Mbps Rx | ||
| BR/EDR TX Active Current, 3 Mbps EDR | 140 | mA | HP chain, Tx Power = Maximum | ||
| BR/EDR RX Active Current, 3 Mbps EDR | 26.7 | mA | HP chain | ||
| BLE TX Active Current | 190 | mA | HP Chain, Tx Power = Maximum (20 dBm) | ||
| BLE RX Active Current | 26.7 | mA | HP chain | ||
| WLAN Standby Associated Mode Current | 119 | uA | DTIM=3 Cisco Aironet AP | ||
| WLAN Standby Associated Mode Current | 51 | uA | DTIM=10 Cisco Aironet AP | ||
| Quiescent current | 3 | nA | |||
| Baud Rate | 9600 | 115200 | 921600 | bps | |
| Wireless Protocols | IEEE 802.11b, 802.11g, 802.11n
Bluetooth 5 (2.1+EDR, LE, LE 2 Mbp) |
||||
| Operational Modes Supported | Wi-Fi Access Point with support for
up to 16 clients Wi-Fi Client Wi-Fi Direct Bluetooth Classic (EDR v 2.1) Wi-Fi Client + Bluetooth Low Energy |
||||
| Receive Power | 10 | dBm | |||
| WLAN Modulation | OFDM with BPSK, QPSK, 16-QAM, and 64-QAM
802.11b with CCK and DSSS |
||||
| WLAN Operating Frequency | 2.412 | 2.484 | GHz | ||
| WLAN Bandwidth | 20/40 | MHz | |||
| WLAN Data Rates | 1
6 |
|
11
54 |
Mbps | 802.11b: 1, 2, 5.5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: MCS0 to MCS7 |
| Bluetooth Channel Spacing | 1 | 2 | MHz | BR, EDR, – 1 MHz
LE – 2 MHz |
Datasheets & Downloads
- Datasheet
- RYWB116 Evaluation board
- RYWB116 Orcad Capture .DSN file
- RYWB11x_Embedded_WLAN_Software_Programming_Reference_Manual
- RYWB11x_Embedded_BLE_Software_Programming_Reference_Manual
- RYWB11x_Embedded_BT_Classic_Software_Programming_Reference_Manual
- RYWB116 Client Mode User Guide
- RYWB116 MQTT Client Application User Guide
MORE FROM THIS MANUFACTURER
