NTX0-27.095-5-100mW

Description

The 10kHz channel NBFM NTX0-27.095 5-100mW transmitter and NRX0 receiver operate on the license exempt 27MHz SRD HF allocation. These modules offer a low power, reliable data link in a Radiometrix SIL standard pin out and foot print. This makes the NTX0/NRX0 pair ideally suited to those low power applications where existing single frequency wideband UHF modules have insufficient range, and in parts of the world where other frequency bands are not appropriate

Get the product specs here:

Features of NTX0-27.095

• Conforms to ETSI EN 300 220-3 (radio) and EN 301 489-3 (EMC) and FCC 95.201-95.225
• Standard frequency: 27.095MHz
• Data rates up to 5kbps
• Usable range over 1km @ 10mW
• 10/12.5kHz Channel spacing
• Feature-rich interface (RSSI, analogue and digital baseband)
• Longer range compared to Wide Band FM modules

Applications

• Radio Control (R/C) Radio Service under FCC Part 95 subpart C
• Radio model control
• Telemetry and telecommand
• Wireless door entry systems
• Simple On/Off switching
• In-building environmental monitoring and control
• Security and fire alarms
• Vehicle/machinery controls

Technical Summary

• 3 stage crystal controlled VCXO
• Supply 2.9V – 15V @ 20mA (10mW)
• Data bit rate: 5kbps max.
• Transmit power: +10dBm (10mW), 50mW (+17dBm) or100mW (+20dBm)
• Size: 43 x 15 x 8mm

Related:

NTX0-27.095-5-10mW | NRX0-27.095-5

Please Note Disclaimer:

Lemos International does not assume any responsibility for errors nor any liability arising from the application or use of any sub-assemblies purchased through Lemos International, including fitness for any particular application.

The purchaser must satisfy all relevant FCC and Radio Regulations which applies to their finished product in the country of intended use. These modules transmit and/or receive radio signals and may not function as intended if interference is present.